Yamaha RX-Z1 Owner's Manual page 79

_ Tap_.
The remote control switches to the Try mode.
_Tap Q to open the first control panel of the
selected component.
In the next step you can
try out your DVD
for Yamaha - 1
If your DVD functions
properly, press Install,
otherwise press Back.
_/_ Try out the buttons on the different control panels
and check whether the component responds to the
RC codes the remote control is sending.
• Even when your component is responding to the current code
set, it is advised to try out other code sets. When your
component responds to more than one code set, install the
most suitable one.
_ If you are not satisfied with the way the component
responds to the selected code set, tap to select
another code set.
If you are satisfied with the selected code set, tap
When the RC codes for your component are installed, the
remote control beeps and returns to the Use mode. Your brand
is now defined for the selected component.
00
_ Define other components you want to operate.
E-74