Connecting A Cable Tv Tuner - Yamaha RX-Z1 Owner's Manual

_o_l_o,._ijI_o_-,."]
• Connecting a cable TV tuner
• Connect
the left and right analog
signal output jacks on your cable TV tuner to the CABLE
@ and @jacks. Connect the composite video
signal output jack on your cable TV tuner to the CABLE VIDEO jack.
• If your cable TV tuner has an S-video output or component video output, you can connect it to this unit. Connect the S-video signal output
jack on your cable TV tuner to the CABLE S VIDEO jack or connect the component video signal output jacks on your cable TV tuner to
the SAT COMPONENT VIDEO jacks.
• Connect the optical digital signal output jack on your cable TV tuner to the OPTICAL SAT jack.
• Connect the coaxial digital signal output jack on your cable TV tuner to the COAXIAL CABLE jack.
OPTICAL OUT
COAXIAL OUT
ANALOG AUDIO
OUT
©©'©
COMPONENTVIDEO OUT
• When connecting
the optical digital signal output jack on your cable TV tuner, it is necessary to change the setting for the OPTICAL SAT
jack of "8 I/O ASSIGNMENT" on the SET MENU in order to connect the digital audio signals to the SAT jack and the video signals to
CAB LE jack (see page __).
• When connecting the component video signal output jacks on your cable TV tuner, it is necessary to change the setting for SAT COMPO-
NENT VIDEO jacks of "8 I/O ASSIGNMENT" on the SET MENU in order to connect the audio signals to the CABLE jack and the
component video signal to the SAT jack (see page __).
E-24