Setting Timers; Editing Timers; Organizing Timers Into Groups - Yamaha RX-Z1 Owner's Manual

I-'1 ::1 k vj [o_ [_o]_hW;Io]lq
With a timer you can activate a component at the time you determine.
• Setting timers
To activate a component at a desired time, you can use the timer.
_ Tap @.
_Open
the Macro menu and select a timer group.
_ witch to the Edit mode via _ at the bottom of the
touch screen.
Empty timer buttons appear in the TIMER control panel.
_Tap the button for which want to set a timer.
you
The first TIMER control panel appears, enabling you to set the
start time.
®®®®
@
Enter the command the timer should execute and tap
@
A timer can contain either a single IR command or a macro.
You can navigate to any control panel you want, just as you do
in the Use mode.
_Tap the clock button and set the start time the
using
left/right buttons.
_Tap one or more buttons to select or deselect
day
days for the timer.
You can choose to repeat the timer weekly.
_ croll down to display the second TIMER control
panel, in which you can set the stop time.
_ Enter the command the timer should execute and tap
@
Set the stop time and select the days following the
same procedure described in steps 6 and 7.
_! the clock button to deselect it and the left
Tap press
button (labeled "CLOSE") to close the timer.
A contirmation screen appears, enabling you to save or cancel
the timer.
Tap
The timer is activated.
• Editing timers
You can edit any timer you have set.
Open the timer that contains the timer.
group
_ witch to the Edit mode via _ at the bottom of the
touch screen.
_Tap the timer want to edit.
you
The contents of the timer appear.
_ MACRO- wake up with CD
i
®®®®
Edit the timer.
@ ress the left button to close the timer.
A contirmation screen appears, enabling you save or cancel the
timer.
Tap
The timer is edited.
• Organizing timers into groups
You can create as many timer groups as you like. Each group can
contain up to 25 timers.
_Open any group.
timer
vi_=_!_'_
_ witch to the Add mode at the bottom of the
touch screen.
You can create a new group, copy an existing group, or restore
a previously-deleted group.
•
:You add a new group in which you can
record new macros.
• :You copy a group and its macros and use
the copy to create new macros.
• :You restore a deleted group and reuse the
macros.
Tap
You see a touch screen on which you can create and edit timer
groups. The new group is added to the Macro menu.
• The timer works only when the remote control's sending eye is
pointed at the controlled component and no obstructions interfere
with the IR signal.
E-87