Switching To Another Component Without Affecting The Active Component - Yamaha RX-Z1 Owner's Manual

I-'!::1 _ vj [o_ [_o]_hjl_Io]lq
• Switching to another component without
affecting the active component
If you switch to another component (for which you already defined
a component action), RC codes are sent out the moment you select
the component.
To switch to another component without sending RC codes, tk_llow
this procedure.
Example
You deigned a device action for the VCRI : when you select the
VCRI, the D-TV switches to channel 10. Now you wish to keep
watching channel 2 on the D-TV when you switch to the VCRI to
rewind a tape.
Open the Device menu.
_Tap the want to select.
component you
The control panel of the new selected component appears and
the remote control icon returns to its original position. You can
now operate the new selected component without affecting the
previously active component.
_ Press and hold the left or button (labeled "NO
right
IR").
The remote control icon turns around 11, indicating that the
component you are going to select will not send IR codes so as
not to affect the active component.
The control panel of the new selected components appears.
The remote control
icon turns around.
E-71