Yamaha RX-Z1 Owner's Manual page 121

_oIU_oIo_
Problem
The remote control is low on
memory.
Cause Remedy
The remote control displays a message indicating it is
time to clean up the memory. The remote control will
do this by permanently removing the components and
macro/timer groups you have deleted. Clearing up
memory can take 10 minutes or longer. Never remove
the batteries during the process.
TheTV goes blank or the input The Device menu item might be programmed to Operate the component without affecting the input
source changes, switch the input source, source (see page __).
The configuration file is corrupted.
The remote control displays one of
the following error messages:
• Can't open configuration file
• Configuration file error
• No configuration file found
• Invalid configuration file version
You have to revert to the original configuration. All
your customized commands, components and macros
are lost. You must reprogram your remote control.
Please contact your dealer or the YAMAHA customer
service.
E-116