Table of Contents
Advertisement
VlN=lltIJ IlidNN_"]
Use this feature
to set the background
and the location
of the OSD, and the brightness
of this unit's front panel display.
i':; r'_T,:_;,i
_'',' _,,, ,..,..T..,.,,
•
DIMM ER
You can adjust the brightness
of the front panel display.
÷ [:, I i'iMER .........
0
0:;[:, Si.i!F:T......
0
Control
range:
-4 - 0
BLUE BACK,=, !:iLiT[=
Initial
setting:
0
•
OSD SHIFT
(OSD off-set
position)
This setting is used to adjust the vertical
position
of the OSD.
Control
range:
+5 (downward)--5
(upward)
Initial
setting:
0
to lower the position
of the OSD. Tap @ to raise the position
of the OSD.
Tap
•
BLUE BACK
This item sets the OSD background.
Choices:
AUTO, OFF
Initial setting:
AUTO
AUTO: Blue background is displayed when no video signal is being input.
OFF:
Nothing is displayed when no video signal is being input.
• With "OFF" selected, no on-screen display is shown on the video monitor when no
video signal is being input.
Use this feature
to prevent
accidental
changes
to DSP program
parameter
values and other settings
on this unit.
_OFF:
ON
-/+
: Select..
't'/$ : Exit.
Initial
setting:
OFF
Select "ON" to protect
the following
features:
° DSP program
parameters
° All SET MENU
items except "16 MEMORY
GUARD"
° Center,
front effect, rear speakers,
rear center, and subwoofer
levels
° The on-screen
display
(OSD) mode
° When "16 MEMORY
GUARD"
is set to "ON",
you cannot
select any other SET MENU
items.
° When "16 MEMORY
GUARD"
is set to "ON",
you cannot
use the test tone.
E-68
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
