Defining The Brands Of Your Components - Yamaha RX-Z1 Owner's Manual

The remote control uses RC codes to activate components. Because there are several brands using specific RC codes, you have to define the
brands of your components. The remote control is set up by default to operate with YAMAHA components.
_Tap scroll button to to second (or third) Home
go
menu panel•
A/V components are listed in the second and third control
panel.
Tap a component name to select the desired compo-
nent•
If the brand of your component isYAMAHA, click
The remote control switches to the Use mode.
If you want to adjust the remote control to operate
with your brand, click _.
The remote control switches to the Brand mode. You can define
your brands by selecting or by searching.
To define the brands by selecting, follow the instructions on
"Defining brands by selecting" on page.
To define the brands by searching, follow the instructions on "
Defining brands by searching" on page.
• For RECEIVER and TUNER, the brands are set up for
YAMAHA by default and the display on the step 3 does not
appear.
• Before you start using the remote control, make sure you
define the brand for each component you want to operate.
YAMAHA RC codes are
installed in this device
Do you want to change it?
In the next screen tap
your brand in the list
If your brand is not
listed, press Search
E-72