Hp Tone Ctrl; Center Geq; Rear Ct Geq - Yamaha RX-Z1 Owner's Manual

[,.']_i vlN=lllIJ
Use this feature to adjust the level of the bass and treble when you use your headphones.
,: UL,; i t ii,,_i,, 1 ' EiJ I
'J lil ikH_i., k,'ii",_
÷ E:f155 !
TR E: L J
,_°
8,:!8
Control range (dB): -6 - +3 for both BASS and TRBL (treble)
Initial setting: 0 dB for both BASS and TRBL (treble)
Select "BASS" or "TRBL".
_ Tap _ or @ to change each level.
Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main
speakers.
'_U"i'iiLk* iiHd
÷ i88Hz !
380Hz !
!kHz !
:];kHz !
i8kHz
!
+
0dB
Control range (dB): -6 - +6
Initial setting: 0 dB for 5-band
Tap _ to select a higher frequency and tap _ to select a lower
frequency.
You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
_} Tap _ or (i_ to adjust the level of that frequency.
• You can monitor the center speaker sound while adjusting this item by using the test
tone. Tap on the PARAMETER control panel before starting the foregoing
procedure. "TEST DOLBY SUR." (or "TEST DSP") appears on the video monitor, and
the test tone starts alternating among the speakers. Once you begin this procedure, the
test tone remains at the center speaker and you can hear how the sound changes as you
adjust the various frequency levels. To stop the test tone, tap (see pages __ and
_).
Use this feature to adjust the built-in 5-band graphic equalizer so the rear center speaker tone matches that of the left and right rear speakers.
5R,!:R,;: 2 ]27
÷ i88Hz !
388Hz !
! k H z !
:!;k Hz !
i 8kHz !
8,-jB
Control range (dB): -6 - +6
Initial setting: 0 dB for 5-band
Tap _ to select a higher frequency and Tap @ to select a lower
frequency.
You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
_ Tap _ or @ to adjust the level of that frequency.
• You can monitor the center speaker sound while adjusting this item by using the test
tone. Tap on the PARAMETER control panel before starting the foregoing
procedure. "TEST DOLBY SUR." (or "TEST DSP") appears on the video monitor, and
the test tone starts alternating among the speakers. Once you begin this procedure, the
test tone remains at the rear center speaker and you can hear how the sound changes as
you adjust the various frequency levels. To stop the test tone, tap (see pages __
and __).
E-61