Table of Contents
Advertisement
H;_o__oIo_t
Can I program a button to execute more than one command?
No, you can't. However, you can create a macro to execute a sequence of commands.
HOWdo I program source
switching?
See "Learning device actions" on page.
How can I edit, label or delete buttons on the Home menu panels?
You can do this via the Device menu items. All changes you make to these items are automatically updated in the Home menu.
How do I reset
the remote
control?
Normally,
you never have to reset the remote
control.
However,
if the remote
control's
display
freezes
or if you notice unusual
behavior,
you
might
need to reset. You will not lose any saved programmed
commands
or macros.
Carefully
press RESET
on the back of the remote
control with a paperclip
or sharp pencil. The remote
control
restarts
and beeps to indicate
it is ready for use.
How do I revert
to the original
configuration?
Reverting
to the original
configuration
restores
the remote
control's
components
and commands
to its state when you purchased
it. This
means
that all programming
is lost permanently.
Normally,
you never have to revert the remote
control.
Touch
and hold the remote
control
icon Q
for a few seconds.
The first setup panel appears.
_
Scroll
to the second
setup
panel.
_Tap
Tap
to confirm
the action.
• If you find that
is inactive,
that is because
no change has been made using the remote
control,
even though
you made
changes
using RAVedit. To activate the button,
define
the brand of a component
or label any element
using the remote
control's
touch screen.
How do I calibrate
the touch
screen?
The remote
control
is calibrated
when it leaves the factory,
so normally
you do not have to calibrate
it yourself.
It is possible
that the remote
control
will display
a message
requesting
that you calibrate
the touch
screen.
If this message
appears,
do the following:
You will first see the instruction "Touch TOP LEFT comer" and then "Touch BOTTOM RIGHT corner".
Tap as close as possible to the upper left corner using the blunt tip of a pencil.
Tap as close as possible to the lower right corner using the blunt tip of a pencil.
E-117
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
