Controls And Functions; Front Panel - Yamaha RX-Z1 Owner's Manual

Hide thumbs Also See for RX-Z1:
Table of Contents

Advertisement

I
I
®
L
I
O STANDBY/ON
Turns this unit on (On mode) and off (Standby mode). When you
turn on this unit, you will hear a click and there will be a 4 to
5-second delay before this unit can reproduce sound.
In Standby mode, this unit consumes a small amount of power so it
can respond to the remote control.
I_ INPUT MODE
Selects the mode of input for sources that output two or more types
of signals to this unit (see page __).
• You cannot control the input mode when you select 6CH INPUT
as the input source.
I_) INPUT SELECTOR
Selects the input source (D-TV/LD, CABLE, SAT, VCR 1, VCR 2,
VCR3/DVR, V-AUX, DVD, MD/TAPE, CD-R, TUNER, CD,
PHONO) you want to listen to or watch (see page _).
O
Remote
control
sensor
Receives signals from the remote control.
SPEAKERS
A/B
When pushed in (ON), these buttons turn on the set of main
speakers connected to the A and/or B terminals on the rear panel.
1_ Front panel display
Shows information about the operational status of this unit (see
page __).
6CH INPUT
Switches between 6CH INPUT mode and normal input modes. 6CH
INPUT mode takes priority over the source selected with INPUT
SELECTOR.
You cannot use DSP sound field programs while using an external
decoder.
PROGRAM <_/_>
Selects the sound field program (see page __).
Selecting a sound field program turns on the effect.
_) PROCESSOR DIRECT ON/OFF
When pushed in (ON), BASS, TREBLE, BALANCE, and BASS
EXTENSION are bypassed, eliminating any alteration of the
original signal.
_) STEREO/EFFECT
Switches the effect speakers (center, front effect, rear and rear
center) on and off. If you turn off the output of these speakers using
STEREO/EFFECT,
all DTS and Dolby Digital audio signals are
directed to the main left and right channels except for the LFE
channel.
• When DTS or Dolby
Digital
signals
are mixed,
the left and right
main channel
signal levels may not match.
• If "IB MAIN SP" on the SET MENU
is set to "SMALL"
and "IE
LFE!BASS
OUT"
is set to "SW",
or "IE LFE/BASS
OUT"
is set
to "BOTH",
the LFE signals
will be output
from the subwoofer.
® FM/AM
Switches
the reception
band between
FM and AM.
_)
AIBICIDIE
Selects
one of the 5 preset station groups
(A to E).
_)
BASS
EXTENSION
ON/OFF
When pushed in (ON), this feature
boosts the bass frequency
of the
left and right main channels
by +6 dB (60 Hz) while maintaining
overall
tonal balance.
This boost is useful
if you do not use a
subwoofer.
However,
this boost may not be noticeable
if the main speakers
are
set to "SMALL"
and the bass output mode is set to "SW."
E-6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rav-2000z1

Table of Contents