Table of Contents
Advertisement
Use this feature to match the tonal quality of four groups of speakers: the main and center speaker group, the front effect speakers group, the
rear speakers group, and the rear center speaker group. CINEMA-EQ consists of a high-shelving equalizer (HIGH) and a parametric
equalizer (PEQ). The high-shelving equalizer changes high frequency characteristics, and the parametric equalizer boosts or cuts any selected
frequency. The equalizer can be used for a variety of purposes, such as adjusting the tonal quality of differing types of speakers, adjusting the
tonal quality in different installation environments, or adjusting the source sound to your liking.
P,iJi:i,i_'_ i:h'_
Tap _
or _
repeatedly to select one of the speaker groups and tap
_ or @ to select"ON".
÷ L_C, R.......
OFF
FRHTEFCT,., OFF
RERRL/R .... OFF:
REARCT.....
OFF:
Tap @
or _
several times to display the setting screen for the
channel to be set.
There are 4 groups (6A - 6D) to be set.
• If "OFF" is selected in step 1, the setting screen for that group will not be dis-
played.
@
or _
to select the item to be
Tap
adjusted.
Select one item at each time from "FRQ"/"GAIN"
for "HIGH"
and "FRQ"/"GAIN"
for "PEQ".
Adjust
the value for the item by tapping
_ or _.
"FRQ"
(frequency)
for "HIGH"
is to set the turn over frequency
and "PEQ"
for the
band central
frequency.
The amplification
increases
for higher "GAIN"
value while
the attenuation
increases
for lower "GAIN"
value.
• When any change has been made on the initial setting, * (asterisk) will be placed in front
of its parameter name.
• CINEMA-EQ does not work when you press STEREO/EFFECT
or the right button
(labeled "STEREO") on the remote control to turn off the effect.
• While "TEST DOLBY SUR." or "TEST DSP" is being activated, the test tones are
output as described below.
@ 6A L,C,R EQ: The test tones are output from the main LfR and center channels.
(When "IA CENTER SP" is set to "NONE", the test tones are output from the
main L/R only.)
@ 6B FRNT EFCT EQ: The test tones are output from the front effect channels.
@ 6C REAR [JR EQ: The test tones are output from the rear L_ channels.
@ 6D REAR CT EQ: The test tones are output from the rear center channels.
•
6A L, C, R EQ (main L/center/main
R equalizer)
Use this feature
to adjust the tonal quality
of the main LfR and center channels.
,,"t'_
i
_', [_ i"h'=
_,I._
I
.
.
l'hl
÷ H!GH:FrRI]:!. i2, '?kHz
GI:I l i4...... 3dP,
PEI? :FrRI;!. i 2,7kHz
G_i I t'i...... 4dB
Control range:
Initial setting:
1.0 kHz - 12.7 kHz (HIGH:
FRQ, PEQ: FRQ),
-9 dB - +6 dB (HIGH:
GAIN,
PEQ: GAIN)
12.7 kHz (HIGH:
FRQ, PEQ: FRQ), -3 dB (HIGH:
GAIN),
-4 dB (PEQ:
GAIN)
E-62
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
