PREPARATION > Preparing a network connection
Connecting a network cable (wired connection)
Use a network cable (CAT-5 or higher straight cable) (commercially available) to connect the product to the
router.
If the router is compatible with DHCP servers, network settings do not have to be configured for this product.
Internet
Router
DIGITAL IN
NETWORK
1
2
COAXIAL
USB
ANTENNA
R
NOTE
If the router is not compatible with DHCP servers, or if you want to configure the network parameters manually, you must
(
configure the network settings.
Use STP (Shielded Twisted Pair) cable to prevent electromagnetic interference.
(
Related links
"Configuring a network" (p.96)
Network Attached Storage (NAS)
WAN
LAN
Network cable
SERVICE
SPEAKERS
L
Computer
AC IN
Rear panel
38