Aastra AastraLink Pro 160 Administrator's Manual page 51

• Extension
Specifies the IP phone extension for this User or Administrator. You can
specify any extension within the dial plan range you defined for your network.
By default, the first phone registered with the AastraLink Pro 160 is assigned
extension 200. When entering an extension the default valid range is 200
through 499, or 2000 through 4999, but the exact range pertains to the 'First
extension' selection made by the administrator during the initial system
configuration.
• First Name
Specifies the first name of the User or Administrator.
• Last name
Specifies the last name of the User or Administrator.
• Password
Specifies the password set up for the User or Administrator.
• Email
Specifies the email address of the User or Administrator.
• Account Type
The Account Type defines the account type (Administrator or User) and
associated privileges. An administrator can configure/use his own IP phone,
manage other IP phones/users on the network, and manage and maintain the
AastraLink Pro 160. A user can configure/use his phone only.
• Operator
Specifies if this User or Administrator is also an Operator. By default, the first
IP phone you register with the AastraLink Pro 160 (the Administrator phone)
is also assigned Operator privileges. The IP phone acting in the role of
Operator may be moved between users, but there must always be one phone
designated as Operator.
Note: The DECT 420d handsets do not support a call-transfer softkey, and
41-001190-02 Rev. 01, Rel. 1.2
therefore, cannot be designated as the "Operator".
Configuring Aastra IP Phone Accounts
Managing IP Phone Users
3-7