Aastra AastraLink Pro 160 Administrator's Manual page 94

AastraLink Pro 160 Administrator Guide
Configuring Groups
AastraLink Web UI
Step Action
6 (optional) Specify a password for the group in the "Password" field.
For Ring Groups only
7 Select the method you want to use to be notified that a voicemail has been recorded for the user
group, in the "Voicemail Notification" field. Valid values are:
• Off (default - disables voicemail notification)
• Email
• Email with Audio Attachment
Note: Since Ring Groups use virtual extensions, these extensions do not have an email address. If
the "Voicemail Notification" parameter is enabled, voicemail notifications are sent to the individual
email address for each member of the Ring Group (configured at the location
My Phone->Preferences).
8 Select the distinctive ring pattern you want to apply to this Ring Group, in the "Distinctive Ring"
field. Valid values are:
• None (default - Tone 1)
• Pattern 1 (Tone 2)
• Pattern 2 (Tone 3)
• Pattern 3 (Tone 4)
• Pattern 4 (Tone 5)
Note: For more information about ring tone patterns, see the section,
Groups only)" on
9 Set the number of times the phone rings before being transferred in the "Rings Before Transfer"
field.
10 Specify the destination where incoming calls should be transferred in the "Transfer To" field. Valid
values are:
• None (default)
• Extension
• Voicemail
• Auto-Attendant
3-50
page 3-45.
"Distinctive Ringing (Ring
41-001190-02 Rev. 01, Rel. 1.2