Users; User List Menu; Groups Menu; Default Softkeys Menu (User Phone) - Aastra AastraLink Pro 160 Administrator's Manual

AastraLink Pro 160 Administrator Guide
Accessing the AastraLink Web UI

Users

The Users menu displays the IP phones currently registered in your AastraLink
Pro 160 network (with extensions). The list of phones includes the Operator (or
administrator) phone as well as all user phones.
From the Users menu, you can view and/or configure the following:

User List Menu

• Upload User List
• Add a phone(s)
• Delete a phone(s)
• Pre-register the phones (individually or as bulk upload) so that they enter
service automatically when connected to the network
• Reboot a phone or all phones
• Configure/edit operator and user accounts

Groups Menu

• Add/delete/edit a Ring Group(s) or Paging Group(s)
Default Softkeys Menu
• Configure/edit default softkey settings for all registered user phones in your
AastraLink Pro 160 network. You can also reset these softkeys to their default
values if required. The tabs that display in this menu are applicable to the
following Aastra IP Phones: 9143i, 9480i, 9480i CT, 6730i, 6731i, 6751i,
6755i, 6757i, 6757i CT. You can also configure the MBU DECT 420d
handset, and secondary, non-Aastra IP Phones.
• Specify default softkey permissions - this allows an Administrator to display
which softkeys are available for users to self-provision at the path,
"My Phone->Softkey".
Note: Softkeys disabled by the Administrator on the "softkey permissions" page
2-12
(User Phone)
are still configurable on a per-user basis by the Administrator, but cannot
be configured by non-privileged users.
41-001190-02 Rev. 01, Rel. 1.2