Configuring Dial Plan Settings - Aastra AastraLink Pro 160 Administrator's Manual

AastraLink Pro 160 Administrator Guide

Configuring Dial Plan Settings

Configuring Dial Plan Settings

You configure AastraLink Pro 160 dial plan settings from the
Configuration->DialPlan menu shown below.
A dial plan describes the number and pattern of digits that a user dials to reach a
particular telephone number. The default dialing plan for the AastraLink Pro 160
is 3-digits, starting with extension 200 (administrator). Users are assigned
extensions 201, 202, etc.
Note: The Administrator can select an alternative 3-digit or 4-digit dialplan and
Figure 4-4. Dial Plan Menu
4-38
first extension when initially configuring the system from the administrator
phone TUI. This cannot be changed after the user phones have been added;
a factory-default of the system greenfield is required to change the dialplan.
41-001190-02 Rev. 01, Rel. 1.2