Aastra AastraLink Pro 160 Administrator's Manual page 169

AastraLink Web UI
Step Action
3 In the "Line x forwards to" field, choose where you want incoming calls to get fowarded and click
<Save>. Valid values are:
• Default
• SLA
• Operator
• FXS A
• FXS B
• <phone number or extension number>
4 (optional) If you select SLA as your destination for incomig calls, in the "SLA rings before transfer"
field, select the number of rings you want the destination phone to ring before transferring the
incoming call. Valid values are:
• forever (destination phone rings until the line is picked up or the line goes to voicemail)
• 1 (phone rings once, then the call is transferred)
• 2 (phone rings two times, then the call is transferred)
• 3 (phone rings three times, then the call is transferred)
• 4 (phone rings four times, then the call is transferred)
• 5 (phone rings five times, then the call is transferred)
• 6 (phone rings six times, then the call is transferred)
5 Click <Save> to save your changes.
41-001190-02 Rev. 01, Rel. 1.2
Configuring AastraLink Pro 160 System and Network Parameters
Configuring Dial Plan Settings
4-59