Viewing The Current System Status - Aastra AastraLink Pro 160 Administrator's Manual

AastraLink Pro 160 Administrator Guide

Viewing the Current System Status

Viewing the Current System Status

You view the current system status for the AastraLink Pro160 from the
Maintenance->Current Status menu
The current status menu contains the following information about the AastraLink
Pro 160:
• Serial Number of the AastraLink Pro 160
• Percent of Voicemail usage
• Line 1 through Line 6 shows the status of each FXO line.
— If the line is connected and receiving voltage from the telephone network,
— If the line is disconnected, the status is "Offline."
— If the line is off-hook, the status is "In Use." This status is an interactive
• Link connection mode and speed for the LAN and WAN. Displays
"Disconnected" if no LAN or WAN connection available.
The Current Status screen also allows you to reboot the AastraLink Pro system
and all of the connected phones, or shut down the entire system.
5-4
the status is "Available."
link that, when clicked, allows the Administrator to disconnect the FXO
line manually. It forces a hang-up of the line and clears any active calls.
(Figure 5-1).
41-001190-02 Rev. 01, Rel. 1.2