Specifying Regional Settings - Aastra AastraLink Pro 160 Administrator's Manual

AastraLink Pro 160 Administrator Guide
Configuring System Settings

Specifying Regional Settings

Use the following procedure to specify regional settings for your AastraLink Pro
160.
AastraLink Web UI
Step Action
1 Select Configuration->System Settings->Regional Settings.
2 Set <Location> to the country where you installed the AastraLink Pro 160. Default is None. Valid
values are:
• None (default)
• Canada
• United States
• Mexico
Notes:
1. The use of "None" is not supported. A valid country must be set during initial greenfield
configuration.
2. If you change the country setting for this parameter, the FXO Auto-Tuning feature must be
initiated to reset the auto-tuning on the FXO ports to the new country.
4-6 41-001190-02 Rev. 01, Rel. 1.2