Configuring System Settings - Aastra AastraLink Pro 160 Administrator's Manual

AastraLink Pro 160 Administrator Guide

Configuring System Settings

Configuring System Settings

You configure AastraLink Pro 160 system settings from the
Configuration->System Settings menu. System settings include the following
tabs:
• Regional Settings* - Allows you to set the geographical location, time zone,
date and time format, and language on the AastraLink Pro. This page also
allows you to set the language that the caller hears when calling into the
auto-attendant.
• Set Time and Date - Allows you to set the time and date manually on the
AastraLink Pro.
• Music on Hold - Allows you to set the source for music-on-hold (audio file,
line-in, or default file on the AastraLink Pro. This page also allows you to
upload a file to use for music-on-hold.
• Relay/Push Button - Allows you to configure the settings on the AastraLink
Pro if you are using a relay/push button in your facility. The default relay
extension is 6100. You can set relay delay, push button alert text, use the
default announcement, or record or upload a new announcement, send a
message to the phone, or send a message to email.
• Voicemail - Allows you to set the maximum duration allowed for a voicemail
message, and also allows you to set the maximum messages allowed to be
stored.
• FXO Tuning - Allows you to run the FXO Automatic Tuning Wizard with the
push of a button.
Note: *The Regional Settings option is intrinsically linked to the initial greenfield
4-4
system configuration.
When system greenfield setup is performed using the TUI and
Administrator phone, the selection of country and timezone during that
process is used to denote the "system configured" state. Setting the same
values using the Adminnistrator login to the Web UI has the same effect.
41-001190-02 Rev. 01, Rel. 1.2