Configuring Network Settings - Aastra AastraLink Pro 160 Administrator's Manual

Configuring Network Settings

You configure AastraLink Pro 160 network settings from the
Configuration->Network->Local Network
include the following tabs:
• Local Network - Allows you to specify the local network parameters for the
AastraLink Pro, such as hostname, domain name, enable or disable Dynamic
Host Configuration Protocol (DHCP), and specific Domain Name Servers
(DNS) 1 and 2.
• Local Services - Allows you to specify local services on the AastraLink Pro,
such as enable or disable remote office and UPnP, specify an external gateway
IP, and specify Hypertext Transport Protocol (HTTP), Session Initiation
Protocol (SIP), and Real-Time Transport Protocol (RTP) parameters.
• External Services - Allows you to specify external services on the
AastraLink Pro, such as Network Time Protocol (NTP) address, Simple Mail
Transfer Protocol (SMTP) relay address, SMTP relay port, and SMTP
username, password, and account.
Figure 4-2. Local Network Menu
41-001190-02 Rev. 01, Rel. 1.2
Configuring AastraLink Pro 160 System and Network Parameters
menu shown below. Network settings

Configuring Network Settings

4-21