Aastra AastraLink Pro 160 Administrator's Manual page 339

AastraLink Web UI
Step Action
3 Turn on "UPnP".
4 Click <Save> to save your changes.
After a successful UPnP with the AastraLink Pro 160, the results are shown in the "Office Router
Port Mapping Table" on
Notes:
1. The external gateway IP (router A wan side IP address) of router A is automatically populated to
the server.
2. HTTP port, SIP port, and RTP ports mappings (map router A wan side TCP/UDP ports to the
server TCP/UDP ports) are set up on router A automatically according to the default value defined on
the server's local server page.
Office Router Port Mapping Table
Active
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
41-001190-02 Rev. 01, Rel. 1.2
Remote Office Configuration of the AastraLink Pro 160 (Server-Side)
Remote Office Configuration of the AastraLink Pro 160
page B-5.
Protocol Internal Port
UDP 5060
UDP 9600
UDP 3000
UDP 3001
UDP 3002
UDP 3003
UDP 3004
UDP 3005
UDP 3006
UDP 3007
UDP 3008
UDP 3009
UDP 3010
External Port IP Address
5060 10.50.11.3
51510 10.50.11.3
*See Note Below
Table
3200 10.50.11.3
3201 10.50.11.3
3202 10.50.11.3
3203 10.50.11.3
3204 10.50.11.3
3205 10.50.11.3
3206 10.50.11.3
3207 10.50.11.3
3208 10.50.11.3
3209 10.50.11.3
3210 10.50.11.3
B-5