Configuring Overhead Paging - Aastra AastraLink Pro 160 Administrator's Manual

Aastra telecom network device administrator guide
Hide thumbs Also See for AastraLink Pro 160:
Table of Contents

Advertisement

Configuring Overhead Paging

The AastraLink Pro 160 has an overhead paging jack (located on the back of the
device) that you can directly connect to an amplifier in order to support overhead
paging.
Overhead Paging Jack
(Green Port)
To access the pager, an IP phone user goes through the Auto-Attendant, and
specifies the correct password, as described in the following procedure.
AastraLink Web UI
Step
Action
1
Select Configuration->Dial Plan.
2
Specify the password (PIN) IP phone users enter to access overhead paging in the "Overhead
Paging PIN" field.
For example, enter: 6000
Note: Default overhead paging PIN is 22222.
3
Click <Save> to save your changes.
For information about configuring Paging Groups, see Chapter 3, the section,
"Ring Groups and Paging Groups"
41-001190-02 Rev. 01, Rel. 1.2
Configuring AastraLink Pro 160 System and Network Parameters
12 VDC 1.25A
Back of AastraLink Pro 160
on
page
Configuring Dial Plan Settings
LAN
3-38.
TM8DC
WAN
4-49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents