Remote Office Configuration Of The Aastralink Pro 160; Description; Network Diagram For Remote Phone Setup - Aastra AastraLink Pro 160 Administrator's Manual

AastraLink Pro 160 Administrator Guide

Remote Office Configuration of the AastraLink Pro 160

Remote Office Configuration of the
AastraLink Pro 160

Description

The AastraLink Pro 160 is a plug and play unit that you can install in your
network. However, to configure the AastraLink Pro 160 for remote office
connections, it is recommended you use the information that this Appendix
provides.

Network Diagram for Remote Phone Setup

The following is a network diagram for Aastralink Pro 160 remote phone setup.
When setting up remote office, the user has the option to configure the required
port forwarding on the phone-side router or the server-side router automatically,
by employing UPnP for UPnP capable routers.*
If UPnP is not supported on the routers, you can manually enter the required port
forwarding mappings on the router. Please consult the router's manual for
procedure to enter and activate port forwarding rules.
*SOHO router should support NAT, port forwarding, and optionally UPnP.
B-2 41-001190-02 Rev. 01, Rel. 1.2