Aastra AastraLink Pro 160 Administrator's Manual page 289

About this Chapter
Introduction
This chapter contains several trouble-shooting solutions for the AastraLink Pro
160. It describes how to interpret the LED status indicator located on the
AastraLink front panel. It also describes how to reboot the AastraLink using either
the Web UI, or the reset switch. In addition, it describes how to use the reset
switch to restore original factory default settings on the device, in order to return it
to an out-of-the-box state.
This chapter also describes how to use the AastraLink Recovery Mode UI to
reinstall system software (that is, reprogram the CompactFlash card and/or the
Onboard flash.) if it is ever required.
Topics
This chapter covers the following topics:
Topic
Monitoring the AastraLink Status LED
Rebooting the AastraLink
Restoring AastraLink Factory Default Settings
41-001190-02 Rev. 01, Rel. 1.2
Troubleshooting Solutions
Rebooting Using the Web UI
Rebooting Using the Reset Switch (Hard Reboot)
Rebooting Using the Web UI
What Happens if I Restore Factory Default Settings?
Chapter 7
Page
page 7-3
page 7-5
page 7-5
page 7-6
page 7-5
page 7-7
page 7-7
7-1