Rebooting the AastraLink
This section describes how to reboot (restart) the AastraLink Pro 160.
You can reboot the AastraLink from the Web UI, or reboot it manually, using the
reset switch located on the back of the device (next to the power receptacle, as
shown on
Rebooting Using the Web UI
To reboot the AastraLink using the Web UI, do the following tasks:
AastraLink Web UI
Step
Action
1
Login to the AastraLink as Administrator.
2
Select Maintenance->Current Status
3
Click on the <Reboot System> button.
The AastraLink reboots. Once the reboot is complete, you will need to login to the system again to
access the AastraLink Web UI.
41-001190-02 Rev. 01, Rel. 1.2
page
7-6).
Troubleshooting Solutions
Rebooting the AastraLink
7-5