GE Monogram ZGP484NGRSS Owner's Manual page 26

Self-Cleaning Oven
Professional All-Gas Range
Self-cleaning
safety
precautions
The self-clean oven feature is designed to make
cleaning the inside of the oven easy by using very
high temperatures to burn away food spills.
WARNING:
Wipe up excess grease
and other food spills with a damp cloth.
Excessivefood soils can ignite leading to smoke
and heat damage.
• Do not clean the oven seals,damage can occur.
• Remove cookware, broiler pan. grid, probe and
any aluminum foil from the oven.
• Hake sure the oven light lens and lens frame are
in place.
• Do not use commercial oven cleaners, abrasives
or oven protectors in or near the self-cleaning
oven.
• We recommend venting your kitchen with an
open window or using a ventilation fan/hood
during the self-clean cycle.
• Clean soil from around the frame and from
around the oven door, outside the oven seals.
These areas must be cleaned by hand.
* The oven racks may be left in the oven during
the self-clean cycle.
IMPORTANT: T he health of some birds is extremely
sensitive to the fumes given off during the self-
cleaning cycle of any oven. Hove birds to another
well-ventilated room.
NOTE:During the self-clean cycle, the cooktop
will be locked out and not functional. If a surface
burner is turned on after the self-dean cycle has
begun, a warning will be displayed on the Oven
Display"err turn surf frnr off" and a beeping sound
will be heard,
NOTE:Self-Cleanwill not work if the temperature
probe is plugged in or if the Sabbath mode is set.
On double oven models, you can set a clean cycle
in both ovens at the same time. The tast oven set
will automatically delay its start until the end of
the first oven's clean cycle.
On double oven models,you can bake in one
oven and self-clean in the other at the same time.
However, you cannot usethe PROOF mode setting
in one oven while the other oven isself-cleaning.
How to
set the
oven for
cleaning
TIMER O
PUSH TO
EC'I
H ni-Knob
Turn to adjust
Pushto select
26
1. Turn off ol! surface burners. (TheCLEANcycle
will not start until atl surface burners have
been turned off.}
2. Turn the Oven Mode Selector to CLEAN.
3. Turn the Temperature knob to CLEAN.
The control automatically defaults to the
recommended clean cycle time of 5 hours.
The clean time may be adjusted to any
time between 3 and 5 hours using the Mini-
Knob. The display wi!l show the actual time
remaining.
4. Push the I1ini-Knob to start the CLEANcycle.
If "CLOSEdoor" scrolls in the display, the
self-clean cycle has been selected but the
door is not closed. Close the oven door.
The !_ symbol will flash as the oven door is
locked, it will not be possible to open the oven
door during the clean cycle.
5. After the clean cycle is complete and the oven
has cooled, "End"will show in the display
and the _ will turn off. Turn the Oven Node
Selector and the Temperature knob to OFF.
To interrupt a clean cycle, turn the Oven Mode
Selector and the Temperature knob to OFF.
When the oven hascoated to a safe temperature,
the i_ symbol will turn off indicating the door
may be opened.
An interrupted clean cycle cannot be restarted
until after the oven is cool enough for the door to
unlock.