Download  Print this page

Display Messages - Hitachi HMDR50E Instruction Manual

Mini disc recorder
Hide thumbs

Advertisement

• DISPLAY MESSAGES

Messages may appear on the display while using the set. The meanings of these mes-
sages are explained below.
Message
Table of Contents data is being read
Nothing is recorded on the loaded disc.
Editing is completed.
The SCMS (Serial Copy Management
System) prohibits digital copying of that
source.
During digital recording, this indicates that
signals are not being input properly due to
incomplete connection of the digital input
jacks, etc.
There is no remaining time on the disc.
There are already 255 tracks on the disc.
This indicates that the editing operation is not
possible.
This means that no titled disc or track has
been input.
The disc has a track title but nothing is
recorded on it.
This appears when you try to record or edit on
a disc for playback only.
This disc is protected against accidental erasure.
100 characters have already been input for the
disc or track title.
Approx. 1700 characters have already been
input for the disc and track titles.
Proper recording was not possible due to
shocks or scratched disc.
ATM (Auto Track Marking) Track numbers are
automatically added when soundless sections
(about 2 sec) are detected during analog
recording.
89
English
Meaning

Advertisement

loading

  Related Manuals for Hitachi HMDR50E

  Related Content for Hitachi HMDR50E

This manual is also suitable for:

Hmdr50ebsHmdr50ucHmdr50wHmdr50wun