Arbitrated Loop Settings - HP Surestore 6164 - Switch Reference Manual

Arbitrated Loop Settings

Telnet Commands
End-of-file (control-D)
The tables in the next section define those settings that may be changed.
This section provides information on arbitrated loop settings.
Field
Send FAN frames?
Always send RSCN?
Send FAN frames?
Always send RSCN?
When entered at a prompt with no preceding
input, terminates the command and saves
changes made.This keystroke is common on
many computers, but can be different on your
system.
Type
Boolean
Boolean
Specifies that fabric address notification (FAN)
frames be sent to public loop devices to notify
them of their node ID and address. When set to 1,
frames are sent; when set to 0, frames are not
sent.
Following the completion of loop initialization, a
remote state change notification (RSCN) is issued
when detects the presence of new
FL_Ports
devices or the absence of preexisting devices.
When set, an RSCN is issued upon completion of
loop initialization, regardless of the presence or
absence of new or preexisting devices.
Default Range
1 0 or 1
0 0 or 1
41