agtcfgShow
Synopsis
Availability
Description
Telnet Commands
Display the SNMP agent configuration.
agtcfgShow
All users
Use this command to display the configuration of the SNMP agent in the
switch. The following information is displayed:
•
- Displays the switch description.
sysDescr
•
- Displays the location of the switch.
sysLocation
•
- Displays the contact information for this switch.
sysContact
•
swEventTrapLevel
possible values:
0 - none
1 - critical
2 - error
3 - warning
4 - informational
5 - debug
See errShow for more information on the event trap level.
Note
•
- Displays whether authorization traps are passed to the
authTraps
trap recipient. The default value is 0 (off), meaning no messages are
sent. A value of 1 (on) means that authorization trap messages are sent
to the community IP addresses configured (see
and SNMPv2c, this indicates that a request containing a community
string is not known to the agent.
- Displays the event trap level. There are six
page
20). For SNMPv1
19