Configupload - HP Surestore 6164 - Switch Reference Manual

configUpload

Synopsis
Availability
Description
Operands
38
Back up the switch configuration to an ASCII file on a host workstation.
configUpload ["host","user","file"[,"passwd"]]
admin
Use this command to upload the switch configuration to a host file.
The upload process uses either FTP or the RSHD protocol (TPC service
514). Both of these services are widely available on UNIX hosts, but less so
on Windows hosts. On Windows NT, the FTP server may have to be
installed from the distribution media and enabled, or on Windows NT or
Windows 9x, there are several freeware and shareware FTP servers
available.
The two utilities supplied for
support uploads, only downloads. Therefore, in a Windows environment,
FTP must be used, and the FTP server must be running before an upload can
occur.
If the
configUpload
prompted for input, including choice of FTP or RSHD. If invoked with
three operands, RSHD is used; otherwise, presence of the fourth operand
(password) selects FTP.
This command has the following operands:
Specify a host name or IP address in quotation marks;
host
for example, "
configuration file is downloaded from this host system.
This operand is optional.
Specify a user name in quotation marks; for example,
user
"
host. This operand is optional.
RSHD.EXE
command is entered without operands, the user is
citadel
". This user name is used to gain access to the
jdoe
and currently do not
CAT.EXE
" or "
192.168.1.48
Fabric OS Reference Manual
". The