Msconfigure - HP Surestore 6164 - Switch Reference Manual

msConfigure

Synopsis
Availability
Description
Operands
Telnet Commands
Configure the Management Server.
msConfigure
admin
Use this command to display and configure parameters used to access the
Management Server. The Management Server allows a storage area
network (SAN) management application to retrieve and administer fabric
and interconnect elements such as switches. It is located at the fibre channel
address, FFFFFAh.
If the Management Server Access Control List (ACL) is empty (default),
the Management Server is accessible to all systems connected in-band to
the fabric. To restrict access, specify the worldwide name (WWN) for one
or more management applications; access is then restricted to those
WWNs.
The ACL is implemented on a per switch basis and should be configured on
the switch to which the management application station is directly
connected.
This command is interactive and provides four choices:
0 Done (with the administration)
1 Display the access list (ACL)
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
If a change is made, you are prompted to save the changed ACL to the
FLASH. The saved ACL is restored on future reboot.
None.
127