HP Surestore 6164 - Switch Reference Manual page 166

166
Table 11. PortLogShow fields (continued)
Field Description
description depends on loop state:
loopscn
OLP offline reason code, usually zero
LIP reason code for LIPs initiated by
value is 800x (x = [1,0xc]; see "Codes:"), or the lower
two bytes of the LIP received, if the code value is
other than 800x
LIM usually zero BMP: memory address for the loop
bitmap
OLD usually zero
TMO encoded value of state when loop initialization timed
out. This value is usually equal to the first word of a
loop initialization frame payload. Other possible
values include:
LIP (req. INITIALIZING) timeout
2
ARB(F0) timeout
94F0F0
CLS timeout
40
Codes:
state
1 Online
2 Offline
3 Testing
4 Faulty
5 E_Port
6 F_Port
7 Segmented
, if the code
FL_Port
Fabric OS Reference Manual