HP Surestore 6164 - Switch Reference Manual page 97

Telnet Commands
lsrRtxTID
inactTo
helloTo
rXmitTo
nCmdAcc
nInvCmd
nHloIn
nInvHlo
nLsuIn
nLsaIn
attHloOut
nHloOut
LSR retransmission timer ID.
Inactivity time-out value, in milliseconds. When
this time-out expires, the adjacency with the
neighbor switch is broken and new paths are
computed to all possible destination switches in
the fabric.
Hello time-out value, in milliseconds. When this
time-out expires, a Hello frame is sent to the
neighbor switch through this port.
Retransmission time-out value, in milliseconds. It
is used to transmit topology information to the
neighbor switch. If no acknowledgment is
received within
rXmitTo
Total number of commands accepted from the
neighbor switch. Number includes Hellos, Link
State Updates (LSU), and Link State
Acknowledgements.
Number of invalid commands received from the
neighbor switch. Usually commands with an
FSPF version number higher than the one running
on the local switch.
Number of Hello frames received from the
neighbor switch.
Number of invalid Hello frames (Hello frames
with invalid parameters) received from the
neighbor switch.
Number of LSUs received from the neighbor
switch.
Number of LSAs received from the neighbor
switch.
Number of attempted transmissions of Hello
frames to the neighbor switch.
Number of Hello frames transmitted to the
neighbor switch.
, frame is retransmitted.
97