Uninitialized Fibre Channel Arbitrated Loop Display
In the figure below, the FC-AL connected to the Fibre Channel Host
Controller in Slot 1 has not initialized. This can be derived from the Fibre
Channel Host Controller having the default ALPA of 255. If this controller
was already initialized as part of an FC-AL, it would have a valid ALPA.
Figure 6-18. Display showing uninitialized FCTC in Slot 1
Information and Updates
For more information on Fibre Channel Arbitrated Loop, see additional
whitepapers at: http:www.compaq.com/support/techpubs/whitepapers.
Diagnostics 75