HP Surestore 6164 - Switch Reference Manual page 15

Example
See Also
Telnet Commands
In the following example, the agtcfgDefault command is run to set the
SNMP agent configuration parameters to the default value; then the
agtcfgShow command is run to verify that the default values are set.
switch:admin> agtcfgDefault
Committing configuration...done.
agent configuration reset to factory default
switch:admin> agtcfgShow
Current SNMP Agent Configuration
Customizable MIB-II system variables:
sysDescr = Fibre Channel Switch.
sysLocation = End User Premise
sysContact = Field Support.
swEventTrapLevel = 0
authTraps = 0 (OFF)
SNMPv1 community and trap recipient configuration:
Community 1: Secret C0de (rw)
No trap recipient configured yet
Community 2: OrigEquipMfr (rw)
No trap recipient configured yet
Community 3: private (rw)
No trap recipient configured yet
Community 4: public (ro)
No trap recipient configured yet
Community 5: common (ro)
No trap recipient configured yet
Community 6: FibreChannel (ro)
No trap recipient configured yet
switch:admin>
agtcfgSet
agtcfgShow
15