Downloading Firmware - HP Surestore 100st - Archive Server Conversion Instructions

Downloading Firmware

Checking and Downloading Firmware
Downloading Firmware
NOTE Ensure that the jukebox is not in LUN mode (logical unit numbering). Downloads
must be done with LUN mode off.
IMPORTANT If you are going to download firmware for the jukebox controller, the customer's
default configurations should be recorded so that the jukebox can be correctly
restored. Go to the CONF * menu on the control panel to access and display the
current jukebox configurations.
1. Turn the jukebox off.
2. Ensure that your PC tool is off.
3. Remove any cable connections to the single-ended ports on the interface
4. Connect a SCSI cable between your PC tool and one of the single-ended ports
5. Turn the jukebox on.
6. Turn your PC tool on.
7. Follow your download utilities instructions to download the firmware needed
8. Go to Chapter 5, "Verifying Proper Jukebox Operation, Labeling, and
4-4
module.
on the interface module. (Connectors on the module are high-density.)
Wait until the jukebox shows READY in the display.
(jukebox and/or drives).
Cleanup."