6. Connect the power and SCSI cables to the interface PCA (see #1, #2, and #4 on
Figure 3-12).
7. Remount the interface module on the side of the chassis with four T-20 screws
(see Figure 3-10).
Figure 3-12
Mounting the SCSI Interface Cables
8. If installing kit C5131J/K/L, go to "Add Cartridge Magazines (C5131J/K/L Kits
Only)" on page 3-16.
If installing any other conversion kit, this completes the hardware installation.
Go to Chapter 4, "Downloading Firmware."
Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes
Install the Replacement Interface PCA
3-15
Need help?
Do you have a question about the Surestore 100st - Archive Server and is the answer not in the manual?