2. Disconnect the control panel and power cable to prepare the right front panel for
removal
a. Remove the control panel cover plate (#1).
b. Remove the control panel interface cable and power cable from the control
panel PCA (#2 and #3).
c. Rotate the control panel until the display faces the right end of the jukebox
(see #1 on Figure 3-3).
Figure 3-2
Removing Cables to Prepare the Right Front Panel for Removal
Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes
Remove the Right, Left and Rear Panels
3-5