HP Surestore 100st - Archive Server Conversion Instructions page 44

32/64/76 slot, 5.2 gbyte drive optical jukebox upgrade and conversion instructions - c1160-90018
Hide thumbs Also See for Surestore 100st - Archive Server:
  • Faq (34 pages)
Table of Contents

Advertisement

Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes
RFI Modifications (For Conversions)
RFI Modifications (For Conversions)
Mounting RFI Clamps on the SCSI and GPIO Cables
1. Mount the RFI clamp on the SCSI and GPO cables on the left side of the
interposer PCA.
Figure 3-14
Adding an RFI Clamp to the SCSI and GPIO Cables Near the Interposer PCA
a. Clip on end of the two RFI plates together (#1 on Figure 3-14).
b. Place the clamp over BOTH SCSI and GPIO cables.
c. Clip the bottom end of the RFI plates together with a clip as shown in #2 on
3-18
Figure 3-14.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Surestore 100st - Archive Server and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents