HP Surestore 100st - Archive Server Conversion Instructions page 35

Replace 2.3 Gb Drives With 5.2 Gb Drives
1. Remove all drive cables from the interposer PCA for all installed drives (see
Figure 3-6).
•
•
•
•
2. Remove the T-20 enclosure mounting screw on each drive enclosure (lower left
on Figure 3-6).
Figure 3-6 Removing Drive Cables and Enclosure Mounting Screws
3. Slide the drive enclosures out of the chassis.
Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes
#1 - drive fan power cable
#2 - SCSI cable
#3 - drive interface cable
#4 - drive power cable (two connectors)
This same pattern of cables on the interposer PCA is the same for each
drive.
Replace 2.3 Gb Drives With 5.2 Gb Drives
3-9