Checking and Downloading Firmware
NOTE
If upgrading a jukebox:
1. Go to "Check the Firmware Revision Level" to see if the jukebox controller
2. Go to "Downloading Firmware" if necessary.
If converting a 2.6-GB-drive jukebox:
1. Go to "Downloading Firmware" and download the current revision of jukebox
2. Go to "Check the Firmware Revision Level" to see if the drives need current
3. Go to "Downloading Firmware" if Step 2 shows that the drives need current
Check the Firmware Revision Level
1. Ensure the jukebox is powered on.
2. Press
3. REVISION # displays. Press
4. Write down the revision number, then press
5. Press
6. Press
7. After viewing the revision level for all drives, press
and/or drives need the current revision of firmware.
controller firmware.
firmware.
firmware.
to select INFO *, then press
NEXT
revision.
until DRIVE FW * displays, then press
NEXT
UPDATING displays briefly, then Dx REV zzzz displays (where x represents
a drive number and z represents the revision level of that drive).
or
to select other drives and press
NEXT
PREV
Downloading Firmware
Checking and Downloading Firmware
.
ENTER
to view the robotics controller firmware
ENTER
.
CANCEL
ENTER
ENTER
CANCEL
.
.
.
4-3