HP Surestore 100st - Archive Server Conversion Instructions page 45

Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes
RFI Modifications (For Conversions)
2. Attach double-sided tape pads to the ends of the two thin RFI clamps.
Figure 3-15 Adding RFI Clamps to the SCSI and GPIO Cables Down the Front Side
3. Press the SCSI and GPIO cables against the side of the chassis and mount the
two RFI clamps in the positions shown in Figure 3-15.
IMPORTANT
RFI suppression is only accomplished if the SCSI/GPIO cable bundle is strapped
tightly to the side of the chassis.
3-19