Continuous Access Synchronous Descriptions; [Cnt Ac-S] Change Option - HP StorageWorks P9000 - Disk Arrays Reference Manual

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Spreadsheet],LUNM Operation,Start,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic Information
Parameter
Start
End

Continuous Access Synchronous Descriptions

[Cnt Ac-S] Change Option

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Change Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Max Initial Copy,CU Activity,Path Blockade Watch(s),
Path Blockade SIM Watch(s),Service SIM}={128,Enable,45,070,
Not Report}
+{LDKC,CU,Service SIM,PPRC Support,SCP Time(s),Max Initial Copy}
=[{0x00,0x00,Not Report,Yes,600,04},
{0x00,0x01,Not Report,Yes,600,04},
{0x00,0x02,Not Report,Yes,600,04},
{0x00,0x03,Not Report,Yes,600,04},
{0x00,0x04,Not Report,Yes,600,04},(snip)
-(snip)],Num. of CUs=255
Detailed Information
Item
Max Initial Copy
CU Activity
Path Blockade Watch(s)
Path Blockade SIM
Watch(s)
Service SIM
LDKC
CU
Service SIM
PPRC Support
SCP Time(s)
148 Audit log examples
Description
Start of the Configuration File Loader.
End of the Configuration File Loader.
Description
The maximum number of initial copy operations set. (1 to 512)
Indicates whether the parallel operation of initial copy by CU is enabled or not.
Enable or Disable will appear.
The path blockade watch period set. The unit is second.
The path blockade SIM watch period set. The unit is second.
Indicates whether the remote copy related SIM is reported or not.
Report, Not Report
The LDKC number.
The CU number of the connected CU.
Indicates whether to report the remote copy-related SIM.
Report, Not Report
Indicates whether the host supports PPRC.
Yes: support, No: not support
The SCP delay time when the pair is suspended. The unit is second.