Time Server Settings - Aastra 480i Administrator's Manual

Parameter –
sip nortel nat timer
Nortel NAT Timer
(in Web UI)
Description
Format
Default Value
Range
Example

Time Server Settings

Parameter –
time server disabled
NTP Time Servers
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
time server1
Time Server 1
(in Web UI)
Description
Format
Default Value
Range
Example
126 IP Phone SIP Admin Guide
Aastra Web UI
Configuration Files
The interval, in seconds, that the phone sends SIP ping
requests to the Nortel proxy.
Integer
30
0 to 2147483647
sip nortel nat timer: 60
Aastra Web UI
Configuration Files
This parameter enables or disables the time server. This
parameter affects the time server1, time server2, and
time server3 parameters. Use "0" to enable time server
and "1" to disable time server.
Integer
0 (enabled)
0 (enabled)
1 (disabled)
time server disabled: 0
Aastra Web UI
Configuration Files
The primary time server's IP address or qualified
domain name. If the time server is enabled, the value
for time server1 will be used to request the time from.
IP address or qualified domain name
0.0.0.0
Not Applicable
time server1: 192.168.0.5
Advanced Settings->Network
aastra.cfg, <mac>.cfg
Advanced Settings->Network
aastra.cfg, <mac>.cfg
Advanced Settings->Network
aastra.cfg, <mac>.cfg