Time Server Settings - Aastra 480i Administrator's Manual

Time Server Settings

Parameter –
time server disabled
NTP Time Servers
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
time server1
Description
Format
Default Value
Range
Example
Parameter –
time server2
Description
Format
Default Value
Range
Example
Aastra Web UI Advanced Settings->Network
Configuration Files aastra.cfg, <mac>.cfg
This parameter enables or disables the time server. This
parameter affects the time server1, time server2, and
time server3 parameters. Use "0" to enable time server
and "1" to disable time server.
Integer
0
0 or 1
time server disabled: 0
Aastra Web UI Advanced Settings->Network
Configuration Files aastra.cfg, <mac>.cfg
The primary time server's IP address. If the time server
is enabled, the value for time server1 will be used to
request the time from.
IP address
0.0.0.0
Not Applicable
time server1: 192.168.0.5
Aastra Web UI Advanced Settings->Network
Configuration Files aastra.cfg, <mac>.cfg
The secondary time server's IP address. If the time
server is enabled, and the primary time server is not
configured or cannot be accessed the value for time
server2 will be used to request the time from.
IP address
0.0.0.0
Not Applicable
time server2: 192.168.0.5
IP Phone SIP Admin Guide 69