Closing A Secure Shell Session; Opening A Serial Session; Closing A Serial Session - HP StorageWorks 12000 - Virtual Library System EVA Gateway User Manual

Closing a Secure Shell Session

To close a secure shell session:
Enter logout, done, quit, bye, or exit and then press Enter.

Opening a Serial Session

To open a serial session:
1. Connect a PC or workstation to the serial connector on the rear of node 0 of the VLS using the
null-modem (serial) cable provided.
2. Establish a CLI session using a terminal emulation program, such as Windows Hyperterminal.
3. Enter administrator or emergency for username.
4. Enter the password for the username entered.
The default administrator password is admin. The emergency login password is repair.
NOTE:
Logging in as administrator or using the emergency login gives you full privileges to all VLS
functions available through the CLI command set.

Closing a Serial Session

To close a serial session, click Logout at the top of the Console Manager window. This logs you out
of the Console Manager and displays the Logon window.
HP StorageWorks 109