Opening A Command View Vls Session From A Web Browser - HP StorageWorks 12000 - Virtual Library System EVA Gateway User Manual

NOTE:
You can enlarge or reduce any region on the window. To change the size of a region, position your
cursor on the border of a pane, and press the left mouse button while simultaneously dragging the
border.

Opening a Command View VLS Session from a Web Browser

NOTE:
Before you can open a Command View VLS session, you must set the VLS network settings. See
"Setting the Network
To open a Command View VLS session from a web browser:
1. Launch a web browser.
2. In the web browser URL box, enter:
https://<fully qualified name of the VLS>
NOTE:
Entering "http://<fully qualified name>" instead of the above URL automatically
redirects you to the secure "https://<fully qualified name>" connection. All
communications are over a secure connection.
3. If a Security Alert window opens and prompts you to accept the Secure Sockets Layer (SSL)
certificate, install the SSL certificate as described in
"Installing the SSL Certificate into your Web
The first time you open a Command View VLS session (and the first time you open a Command
View VLS session after changing the fully qualified name of the VLS), a Security Alert window
opens and prompts you to accept the Secure Sockets Layer (SSL) certificate.
4. Enter administrator or user in the Username box. The user name is case sensitive.
NOTE:
Logging in as administrator gives you full privileges to all VLS functions available through
Command View VLS. Logging in as a user gives you only viewing and cartridge management
privileges.
5. Enter the appropriate password in the Password box for the username entered.
The default administrator password is admin. The default user password is guest. The password
is case sensitive.
6. Click Login.
Settings" on page 111.
Browser" on page 106.
HP StorageWorks 105