Warning And Error Messages; Menu Options; Warning! Dialog Box - HP StorageWorks 2/140 - Director Switch Product Manager Manual

Configuring the Director

Warning and Error Messages

When you click Activate, if any node attached to a port does not match the WWN or
nickname in that port's Bound WWN column, a warning dialog box displays. If you
click Continue, all the nodes listed will be logged off, and the ports will attach to the
respective devices identified in the Bound WWN column.
Figure 3–4: Warning! dialog box
When you click Activate, if the format for the WWN or nickname in the Bound
WWN column is not valid, an error message displays. For example, the WWN is not
in the xx.xx.xx.xx.xx.xx.xx.xx format.

Menu Options

Menu options are available when you right-click any column except the Port #
column:
• Name (open systems mode only)
— Clear All Port Names—Clears all port names entered in this column.
• Blocked (open systems mode only)
— Block All Ports—Places a check mark in all check boxes in the Blocked
column and blocks all ports on the switch.
— Unblock All Ports—Clears all check boxes in the Blocked column and
unblocks all ports on the switch.
3–12 director product manager user guide