HP StorageWorks 2/140 - Director Switch Product Manager Manual page 189

Table A–1: Product Manager Messages (Continued)
Message
Could not remove
dump files from
server.
Could not stop port
diagnostics.
Could not write
firmware to flash.
CUP name and port
name are identical
Date entered is
invalid.
director product manager user guide
Description
Dump files could not
be deleted from the
HAFM server
because the link may
be down or the
notebook PC or
Product Manager
application is busy.
Port diagnostics
could not be stopped
by the Product
Manager application
because the Ethernet
link is down or busy,
or because the
director is busy.
A firmware version
could not be written
from the HAFM
server to FLASH
memory on the
director's CTP card.
Within the address
configuration, one or
more of the port
names are the same
as the CUP name.
The date is entered
incorrectly at the
Configure Date and
Time dialog box.
Individual field entries
may be correct, but
the overall date is
invalid (for example, a
day entry of 31 for a
30-day month).
Information and Error Messages
Action
Retry the operation later. If
the condition persists, contact
the next level of support.
Retry the operation later. If
the condition persists, contact
the next level of support.
Retry the operation again. If
the condition persists, contact
the next level of support.
Make sure all names are
unique for the ports and CUP
name.
Verify each entry is valid and
consistent.
A–11